Hello,
Guys!
Today
we are talking about HDDs, nowadays technology is advancing at a rapid pace,
and we are seeing innovations and improvements in technology every day. One of
the most significant changes we have seen in recent years is the downfall of
HDDs (Hard Disk Drives).
 |
| Hard Disk Drive |
HDDs
have been the primary storage device in computers for a long time. However,
they are starting to become outdated, the main reason is the slow speed and
limited life of HDDs, so many people are moving to newer technologies like SSDs
(Solid State Drives).
 |
| HDD Vs SSD |
So, what
is causing the downfall of HDDs?
Slow
Read/Write Speeds:-
One of
the biggest causes of HDDs is their slow read/write speeds. HDDs use a spinning
disk to read and write data, which takes a lot of time to perform. On the other
hand, SSDs use flash memory, which is performed much faster than HDDs and is
more reliable.
Limited
Lives:-
The
main reason for the downfall of HDDs have limited lives, and they tend to fail
after a few years of use. So, we have to change the HDDs drive after every
three to four years, and cause of this we fear the loss of data, this is because
of the moving parts inside the drive, so the HDDs work properly for a limited
time. On the other hand, have no moving
parts inside the SSDs, so they tend to last longer and are more reliable.
Prone
to Physical Damage:-
HDDs
are prone to physical damage and even a small bump or drop can cause damage to
the drive. This can result in data loss or complete failure of the drive. SSDs
are much more durable and can withstand physical shocks and drops without any
damage.
Noise
and Vibration:-
HDDs
produce a lot of noise and vibration when in use. This can be annoying for
users and can also damage the drive over time. SSDs are completely silent and
produce no vibration, making them a more attractive option for many users.
Motor
Failure:-
The
platters of your hard drive have stopped spinning for another reason. If your
hard drive is making strange noises or warning indications, such as beeping or
stuttering, the spindle motor may have failed. This mechanical failure prevents
you from accessing any of the data on your hard disc and grinds it to a halt,
often quite literally.
For
storage, the spindle motor typically turns the disc platters at 5200 RPM or
7200 RPM, which is thousands of revolutions per minute. If they are not allowed
to spin or if the fluid in the bearings dries out, motors can seize up and burn
out.
Although
hard drive motors are often fairly dependable, the parts are extremely
sensitive to shock, such as being dropped or accidentally hit. Moreover, the
motors don't tolerate conditions with a lot of moisture or heat. Another
possibility is that the motor will just stop working after heavy use; this occasionally
happens with very old hard drives.
Price:-
Finally,
the cost of SSDs has come down significantly in recent years, we can easily
purchase SSDs from an e-commerce website and computer market at affordable
prices because many tech companies are manufacturing SSDs at very high speed.
In
conclusion, the downfall of HDDs is mainly due to their slow read/write speeds,
limited lifespan, physical vulnerability, noise and vibration, and the
decreasing price of SSDs. If you are looking for a new storage device for your
computer, it is recommended to consider an SSD or cloud storage as a more
reliable and efficient option.
0 Comments